Mini Screw Mandrel Reinforced 3.2mm Shank

R13.00

Mini Screw Mandrel Reinforced 3.2mm Shank – Screw type mandrel.

The mandrel can be used with rotary mini accessories designed for cutting/sawing, grinding and polishing applications.

Tighten/loosen the supplied screw to change accessories.

Fit the accessory between the supplied reinforced phenolic resin flanges and make sure that the screw on the mandrel is tightened before use.

4 in stock

SKU: TC08352 Category:
Torkcraft Power Tool Accessories

Description

Fitting the tool bit
fitting sm1 Mini Screw Mandrel Reinforced 3.2mm Shank 1

The shank of the rotary cutter is securely locked in place by fitting it in the corresponding collet or making use of a keyless chuck.

For improved engraving accuracy, make use of a flexible shaft connected to the rotary engraver.

Rotation speed:

Most rotary tools have the benefit to adjust the rotation speed. Many tool bits that fit in rotary tools have a maximum speed setting. This can normally be found on the packaging.

All materials react differently to speed and will need the tool bit to rotate slower. It is recommended to start using accessories on the slower speed first, before increasing the speed as needed.

The diameter of the tool bit fitted also determines the rotation speed. The larger the diameter, the slower the speed. If the speed is set too high, it could bend the shank/shaft resulting in injury.

Brand

Tork Craft

Torkcraft Power Tool Accessories